Pool Maintenance in West Chase
Are you looking for Pool Maintenance in West Chase? If so, keep reading:
Floridians love their pools, which is no surprise. In fact, there are over 10 million residential pools in the United States, according to the Association of Pool & Spa Professionals — and a significant number of them are found in Florida.
Pools are both entertaining and time-consuming. They need constant care, which may be difficult in West Chase, where pools may require more attention during the hot summer months.
That’s where Panther Pools comes in. We’re a pool cleaning business with a focus on residential and commercial pool care. We are located in Tampa, Florida, and serve the Westchase and South Tampa areas.
At Panther Pools, we offer customer support 7 days a week. The owner of Panther Pools, Todd, is a Certified Pool Operator, a former law enforcement detective, and has a BA from Quinnipiac University – so you know you’re in good hands.
We service all of our pools, so you don’t have to worry about flying across the country for a quick pool fix. We’ve covered everything, from spring replacement to winterization and pump repair! All of our professionals are licensed, bonded, and insured. Our services include pool cleaning, maintenance, and repairs.
If you’re searching for the best pool maintenance service in West Chase, look no further than Panther Pools. Get in touch with us immediately to discover more about our services or to book a complimentary consultation.
5 Tips For Pool Maintenance In West Chase
1. Skim the Surface
Debris accumulates on the surface of your pool every day. Removing this debris will help to maintain the water clean and allow you to deep clean less often. Sweep a telescopic pole with your skimmer net across the surface of your pool to gather trash. Before replacing the net with water, shake particles onto the ground if it becomes filthy.
2. Brush the Walls
You’ll need to remove dirt, chemical residue, and perhaps algae development to clean your pool’s walls. Reattach the pool brush using that telescopic pole once again. Using a brush, clean the walls of your pool, ladder, and corners. Brush systematically to avoid missing tiny gaps that may allow algae to grow. Brushing expels trapped particles and algae from the water, making it easier for chemicals or a pool vacuum to pick up after them.
3. Vacuum the Floor
Connect the vacuum head and hose to the telescopic pole to clear debris from the bottom of your pool. Lower the vacuum to the bottom of the pool and press the other end of the hose against a jet to remove air from it. The air has been removed from the vacuum when bubbles cease forming, and you’re ready.
Remove the strainer basket from your skimmer and connect the vacuum hose to the suction port at the bottom of it.
Start at the wall and work toward the center to clean your pool. Using a long-handled vacuum with a wide head is ideal for reaching down to corners of your pool. Remove all traces of water from the walls using a sprayer. For any stains that may have occurred on your liner, consider hiring an expert to remove them professionally so you can avoid further damage or costs. To fully clean out the bottom and sides of your pool, use the nozzle on your vacuum cleaner to suck up debris as you vacuum over it (in sections). After each pass over the swimming area, do this to prevent settling particles when cleaning with chemicals. When everything has been swept away, turn off both filters before discharging anything back into it.)
4. Clean the Filter
It will be useless if you do not clean your pool’s filter. You’ll have to clean your pool more frequently if its filter isn’t efficient enough to move the water freely. Your pool almost certainly has one of three types of filters. Cleaning each type requires a specific method.
Backwashing Your Pool Filter
Backwashing is the act of running your pool pump backward to flush out the system. Sand and DE filters can be back washed for a quick clean but must be cleaned thoroughly once or twice a year. Turn off the filter and connect the backwash hose to the filter’s waste port to backwash your pool. Then, turn the valve to backwash. Next, turn the filter on for about two minutes. Turn the filter off and set the valve to rinse. Turn the system on for another minute. Finally, turn the system off and set the valve to filter. If you have a DE filter, follow the manufacturer’s instructions to add DE.
Cleaning Your Pool Filter
Sand Filter:
Backwash the filter, turn off the pump, and set it to filter. Open the pump lid and add sand filter cleaner per the manufacturer’s instructions. Turn the pump for 10-15 seconds to carry the cleaner into the sand filter. Turn off the pool pump and leave it off for 8 hours or overnight. Complete the backwashing and turn the filter back to the standard setting.
How to clean your cartridge filter:
Turn off the pump and filter and release air from the system. Open the filter and remove the cartridge. A damaged cartridge will have to be replaced. If the cartridge isn’t damaged, begin by rinsing it thoroughly with a garden hose. If the filter still looks dirty, clean it with a commercial filter or soak it overnight. When the filter is clean, replace or lubricate the O ring. Rinse the cartridge and replace it in the filter. Complete the process by turning the pool filtration system back on.
DE Filter:
Wear gloves and a face mask to clean your DE filter. Backwash the system, turn off the pump, and remove air from the system. Open the drain plug to let water drain from the filter. Open the filter tank and rinse out the tank. Rinse off the manifold, and filter grids, then check for damage. If the manifold or grids are still dirty, clean with a commercial cleaner or soak overnight. Replace or lubricate the O ring and return the manifold and grids to the tank. Following your manufacturer’s instructions, create a slurry of DE and water. Turn on the pump and release air from the system. Within 60 seconds, pour the slurry into the pool skimmer.
5. Wash the Deck
To prevent your pool from being infested again, sweep all leaves, grass clippings, and other trash away from its vicinity. Eliminate algae and chemical residue by using a high-pressure hose or pressure washer to wet the area. To remove algae growth and germs from your pool’s deck, clean it with a solid brush followed by a specific pool deck cleaner.
There are many reasons to hire Panther Pools for your pool maintenance needs in West Chase. We are a licensed and insured company with years of experience in the industry. Panther Pools offers a wide range of services to meet your needs, and we pride ourselves on our customer service. We understand that every pool is different, and we will work with you to create a perfect maintenance plan for your situation.
Contact us today to schedule a free consultation.
